2015-2017 Subaru WRX STI 6 Speed Manual Transmission Swap Kit / DCCD / Differential / Axles / Fits 2008-2021 WRX

Donor Car:

2016 Subaru WRX STI – 71K

Functionality:

Removed from a 2016 Subaru WRX STI with 71k original miles. In good working condition, we were able to fully run and test the components prior to dismantling the vehicle. Transmission was able to shifted through each gear with no grinding or whines during testing. Differential spun smoothly with no odd noises or whines as well. Fluid has been drained from the transmission and differential with no abnormalities. Will ship drained of all fluids. Driveshaft had no play or wobbles. All four axles are fully intact with no damage to the CV joints.

Physical Condition:

All included components are in good physical condition with no major damage. Components have some typical light surface rusting and corrosion from normal use. Transmission housing had no physical cracks or damage. The included axles have no bends or damage. Free of any rips or tears in the rubber boots. There will be some hardware and components reused for installation of the components.

Fits:

2015, 2016, 2017 Subaru WRX STI (direct replacement)

2008, 2009, 2010, 2011, 2012, 2013, 2014 Subaru WRX (upgrade)

2015, 2016, 2017, 2018, 2019, 2020, 2021 Subaru WRX (upgrade)

Fitment Notes:

This swap kit includes the following components :

– 6 Speed Manual Transmission

– STI short throw shifter

– clutch slave cylinder

– clutch master cylinder with hardline

– transmission dogbone mount

– Front Axles

– Front spindles and wheel hubs

– drive shaft

– 3.54 ratio R180 rear differential

– rear axles

– driver side rear spindle with wheel hub

– DCCD controller

– transmission wiring harness

– factory starter motor

Includes everything as shown in the photos. Please do your research regarding any other necessary components or modifications necessary to complete this upgrade for a 2008-2021 Subaru WRX model. You will need to source the correct flywheel / clutch assembly for use as an upgrade. The passenger side rear knuckle / hub was damaged on the donor vehicle, so you will need to source an addition passenger rear knuckle / hub for installation if your application requires the use of the STI style knuckles / hubs.